Build
PHMSA Proposes First LNG Safety Regulation Overhaul Since 2006
The Pipeline and Hazardous Materials Safety Administration has issued a proposed rulemaking to update LNG facility safety standards for the first time in nearly two decades, incorporating current industry standards and responding to congressional mandates.
What PHMSA Is Proposing
The Pipeline and Hazardous Materials Safety Administration (PHMSA) has issued a notice of proposed rulemaking (NPRM) to comprehensively revise its safety standards for liquefied natural gas (LNG) facilities. The proposed amendments would update 49 CFR Parts 191 and 193, which govern LNG facility reporting and safety requirements. According to the document, PHMSA's LNG regulations are largely based on the 2001 edition of NFPA 59A — Standard for the Production, Storage, and Handling of Liquefied Natural Gas — and have not been updated since 2006. The document states that NFPA 59A-2001 is now seven editions out of date.
Background: A Changed Industry
The rulemaking's own narrative describes a U.S. LNG industry that has changed dramatically since PHMSA issued its first federal safety standards in 1970. At that time, the agency explains, the industry comprised mostly relatively small "peak-shaving" facilities used to liquefy and store natural gas for delivery to local markets during times of peak demand, with the handful of large-scale facilities primarily built to import natural gas for domestic consumption. The document states that U.S. natural gas production has increased significantly over the past two decades — driven by technological advancements in the oil and gas industry — and that an increasing number of U.S.-based facilities are now exporting LNG to foreign markets. These changes, the agency states, have created a need for the construction and expansion of LNG facilities.
New Technologies and Modern Practices
The document describes how modern operational and maintenance practices within the LNG industry are considerably more sophisticated and robust, reflecting many thousands of hours of experience since the 1970s. Specifically, the rulemaking identifies new technologies that have emerged, including "membrane" tanks — which employ a thin cryogenic steel inner liner with a load-bearing concrete outer tank, an approach the document describes as offering improved storage capacity, reduced material costs, and faster construction schedules than earlier LNG storage tank designs — and pipe-in-pipe (PIP) transfer systems, which the document states provide enhanced containment of releases from cryogenic piping. The proposed amendments would incorporate the latest consensus industry standards for the siting, design, construction, operation, and maintenance of LNG facilities.
Congressional Mandates and GAO Recommendations
The NPRM states that this rulemaking directly responds to two congressional directives. The PIPES Act of 2016 (Public Law 114-183) directed PHMSA to develop regulations for permanent, small-scale LNG facilities, an issue the document notes is specifically addressed in more recent editions of NFPA 59A. The PIPES Act of 2020 (Public Law 116-260) directed PHMSA to develop alternative, risk-based operations and maintenance requirements for large-scale LNG facilities, an approach the document describes as consistent with modern regulatory frameworks that apply in other industries. The Government Accountability Office also advised PHMSA to update its regulations to align better with current editions of consensus industry standards, according to the document.
Key Regulatory Changes
Among the most substantial changes proposed, the document highlights amendments to reporting requirements for safety-related conditions and incidents, including a proposed clarification of those requirements. The rulemaking is designated as economically significant and spans 75 Federal Register pages, with a section-by-section discussion of proposed changes to both Part 191 and Part 193. The document states that the proposals will promote the use of new technologies, reduce unnecessary barriers to investment, and provide regulatory certainty for interested stakeholders.
What to Watch
Comments on the NPRM must be submitted by January 4, 2027. PHMSA has also indicated that a public meeting of its statutory advisory committees will be held on a date to be announced in the Federal Register.
What This Means for Recipients
State, local, and tribal governments — as well as consultants serving LNG facility operators or siting authorities — should note that the proposed rule would revise the federal safety standards governing LNG facility siting, design, construction, operation, and maintenance under 49 CFR Parts 191 and 193. The rulemaking would incorporate by reference updated editions of NFPA 59A in place of the 2001 edition currently embedded in regulations, and would introduce risk-based operations and maintenance requirements for large-scale LNG facilities. Entities with an interest in the regulation of LNG facilities, including small-scale and permanent facilities, have until January 4, 2027 to submit comments.
Related
- Build hub
- FAA Issues Final Airworthiness Directive for Boeing 757 and 767 Over 5G C-Band Radio Altimeter Interference in Canadian Airspace
- FERC Advances Four Energy Infrastructure Proceedings; FAA Issues Immediate Boeing 737 Airworthiness Fix
- FERC Discloses Exempt Off-the-Record Communication in Docket ER26-2389-000
Sources
16 citedEvery hard fact above is grounded in and cited to a primary source record.
-
PHMSA issued a notice of proposed rulemaking (NPRM) to revise its safety standards for LNG facilities.
federalregister.gov -
The proposed amendments would update 49 CFR Parts 191 and 193.
federalregister.gov -
PHMSA's LNG regulations are largely based on the 2001 edition of NFPA 59A and have not been updated since 2006.
federalregister.gov -
NFPA 59A-2001 is now seven editions out of date.
federalregister.gov -
PHMSA issued its first federal safety standards for LNG facilities in 1970.
federalregister.gov -
At the time of the first federal standards, the U.S. LNG industry comprised mostly relatively small 'peak-shaving' facilities used to liquefy and store natural gas for delivery to local markets during times of peak demand.
federalregister.gov -
An increasing number of U.S.-based facilities are now exporting LNG to foreign markets.
federalregister.gov -
Membrane tanks offer improved storage capacity, reduced material costs, and faster construction schedules than earlier LNG storage tank designs, according to the document.
federalregister.gov -
Pipe-in-pipe (PIP) transfer systems provide enhanced containment of releases from cryogenic piping, according to the document.
federalregister.gov -
The PIPES Act of 2016 (Public Law 114-183) directed PHMSA to develop regulations for permanent, small-scale LNG facilities.
federalregister.gov -
The PIPES Act of 2020 (Public Law 116-260) directed PHMSA to develop alternative, risk-based operations and maintenance requirements for large-scale LNG facilities.
federalregister.gov -
The Government Accountability Office advised PHMSA to update its regulations to align better with current editions of consensus industry standards.
federalregister.gov -
The rulemaking is designated as economically significant and spans 75 Federal Register pages.
federalregister.gov -
Comments on the NPRM must be submitted by January 4, 2027.
federalregister.gov -
A public meeting of PHMSA's statutory advisory committees will be held on a date to be announced in the Federal Register.
federalregister.gov -
New technologies identified in the rulemaking include 'membrane' tanks, which employ a thin cryogenic steel inner liner with a load-bearing concrete outer tank.
federalregister.gov