The General Plan

Build

FAA Issues Three Engine Safety NPRMs, Airspace Update for Laughlin AFB

The FAA is simultaneously proposing airworthiness directives for Pratt & Whitney Canada, Boeing 747, and GE Passport 20 engines while finalizing administrative airspace changes at Laughlin Air Force Base in Texas.

Engine Airworthiness Directives: Three Concurrent NPRMs

The FAA has issued three separate notices of proposed rulemaking (NPRMs) targeting unsafe conditions across different engine and airframe product lines, all with a comment deadline of December 28, 2026.

GE Passport 20 Engines — Fuel Tube Fire Risk. The most operationally detailed of the three proposals targets certain General Electric Company Model GE Passport 20-17BB1A, GE Passport 20-18BB1A, GE Passport 20-19BB1A, and GE Passport 20-19BB1B engines. The proposed AD was prompted by a report that a GE Passport 20 engine experienced a fire warning and a subsequent in-flight shutdown (IFSD). According to the document, a manufacturer investigation revealed that hot gas leakage at the high-pressure compressor (HPC) case split line eroded a start bleed valve (SBV) fuel tube, which caused fuel leakage and an engine core compartment fire. As a result, the manufacturer redesigned the SBV fuel tube to prevent erosion from hot gas impingement. The proposed AD would require replacement of the affected SBV fuel tube with the redesigned version. The FAA estimates this proposed AD would affect 126 engines installed on aircraft of U.S. registry. The FAA estimates the replacement action requires 36 work-hours at $85 per hour, plus $1,997 in parts cost, for a cost per product of $5,057 and a total cost on U.S. operators of $637,182. The docket number is FAA-2026-13813.

Pratt & Whitney Canada PW814GA and PW815GA — Life-Limited Parts Limits Revised. A second NPRM covers all Pratt & Whitney Canada Corp. (P&WC) Model PW814GA and PW815GA engines. The document explains that Transport Canada previously issued AD CF-2023-73 (dated November 3, 2023) requiring replacement or inspection of affected components after P&WC determined that certain engine components no longer meet the life-limited component cyclic limits and mandatory scheduled inspection and maintenance intervals previously published in the airworthiness limitations manual (ALM). Since that earlier directive, the manufacturer revised the airworthiness limitations section (ALS) of the existing ALM to introduce new or more restrictive airworthiness limitations and associated thresholds and intervals for life-limited parts. Transport Canada consequently superseded CF-2023-73 and issued Transport Canada AD CF-2025-71, dated December 30, 2025, which the FAA is now mirroring. The proposed FAA AD would require updating the ALS of the existing ALM or instructions for continued airworthiness (ICA) and the existing approved maintenance or inspection program, as applicable, to incorporate new or more restrictive instructions and associated thresholds and intervals for life-limited parts. The document states this condition, if not addressed, could result in damage to the engine and damage to the airplane. The docket number is FAA-2026-13811.

Boeing 747-400 and 747-400F — Hydraulic Pump Fire Risk. A third NPRM covers all Boeing Company Model 747-400 and 747-400F series airplanes, prompted by a report of an overheated alternating current motor pump (ACMP) that caused a fire in the main landing gear (MLG) wheel well. The document explains that the FAA received a report of a fire in the MLG wheel well on a Model 777 airplane, and that a subsequent investigation found the cause to be an overheated ACMP with a missing lock washer and nut on a moving contact in the related electrical load control unit (ELCU). According to the document, the missing lock washer and nut left the main contact operator bar unrestrained and in a position that let two-phase power flow to the ACMP, causing it to overheat, leak hydraulic fluid, and start a fire. The document notes that the affected ACMPs can also be installed on Model 747-400 and 747-400F series airplanes. As a result, the design of the ACMP has been modified to include fusible links as a new feature to prevent overheating if one electrical phase fails. The proposed AD would require a maintenance records check or inspection for any installed ACMP with a certain part number and applicable on-condition actions, and would also prohibit installation of affected parts. The document notes that AD 2026-19-04 (Amendment 39-23471, 91 FR 61127, September 28, 2026) already addresses the same unsafe condition for Model 777-200, -200LR, -300, -300ER, and -777F series airplanes. The docket number is FAA-2026-13810.

Noise Certification Information Collection Renewal

Separately, the FAA is seeking public comments by January 12, 2027 on its intention to request OMB renewal of the information collection under OMB Control Number 2120-0659, covering noise certification standards for subsonic jet airplanes and subsonic transport category large airplanes under 14 CFR part 36. The document explains that the original information collection was implemented to show compliance with the Aircraft Noise Abatement Act of 1968, a statute now codified in 49 U.S.C. 44715. For this renewal, the FAA proposes 18 total noise certification projects per year. Each applicant must submit a noise compliance report to the FAA, which uses it to make a finding that the airplane is in noise compliance with the regulations; the document states these compliance reports are required only once when an applicant seeks to certificate an aircraft type. The estimated average burden is 200 hours per applicant for the compliance report, at an estimated cost of $20,912 per applicant or a cumulative total of $376,416 per year for 18 applicants. The document states that without this data collection, the FAA would be unable to make the required noise certification compliance finding.

Laughlin AFB Class C Airspace: Administrative Final Rule

The FAA has also issued a final rule amending the Class C airspace legal description for Laughlin Air Force Base, Del Rio, TX, effective 0901 UTC, February 18, 2027. The document describes the action as purely administrative: the geographic coordinates of the airport reference point (ARP) are updated from lat. 29°21'36" N, long. 100°46'39" W to lat. 29°21'34" N, long. 100°46'41" W — a 2-second difference in latitude and longitude — to match the FAA's National Airspace System Resources (NASR) database information. Additionally, the first line of the text header is amended from "ASW TX C Laughlin AFB, TX" to "ASW TX C Del Rio, TX," and the outdated term "Airport/Facility Directory" is updated to "Chart Supplement." The document explicitly states this action does not change the lateral boundaries, altitudes, or operating requirements of the Class C airspace area. The FAA invoked good cause under the Administrative Procedure Act to bypass notice and comment, characterizing the amendments as routine and the expected impact on operators as de minimis. The changes update FAA Order JO 7400.11M, dated July 30, 2026, and effective September 15, 2026.

What to Watch

  • December 28, 2026: Comment deadline for all three engine-related NPRMs — GE Passport 20 SBV fuel tube (FAA-2026-13813), P&WC PW814GA/PW815GA life-limited parts (FAA-2026-13811), and Boeing 747-400/747-400F ACMP fire risk (FAA-2026-13810).
  • January 12, 2027: Comment deadline for the FAA's noise certification information collection renewal (OMB Control Number 2120-0659).
  • February 18, 2027 (0901 UTC): Effective date for the Laughlin AFB Class C airspace administrative amendment.

What This Means for Recipients

Operators of P&WC PW814GA/PW815GA, GE Passport 20, and Boeing 747-400/747-400F series aircraft should monitor all three NPRMs, as final adoption would impose mandatory maintenance records checks, part replacements, or program updates with compliance thresholds tied to the respective manufacturers' revised documentation. Aircraft manufacturers and applicants seeking type certification for subsonic jet or large transport category airplanes must comply with 14 CFR part 36 noise certification reporting requirements; this renewal proceeding, with a comment deadline of January 12, 2027, affirms that the one-time-per-aircraft-type compliance report obligation and its associated burden estimates remain in effect. Operators flying in the Del Rio, TX, Class C airspace area are not subject to any change in boundaries, altitudes, or operating requirements as a result of the Laughlin AFB administrative amendment effective February 18, 2027.

Related

Sources

38 cited

Every hard fact above is grounded in and cited to a primary source record.

  1. The FAA must receive comments on the GE Passport 20 engine NPRM by December 28, 2026.

    federalregister.gov
  2. The proposed AD covers certain General Electric Company Model GE Passport 20-17BB1A, GE Passport 20-18BB1A, GE Passport 20-19BB1A, and GE Passport 20-19BB1B engines.

    federalregister.gov
  3. A GE Passport 20 engine experienced a fire warning and a subsequent in-flight shutdown (IFSD).

    federalregister.gov
  4. A manufacturer investigation revealed that hot gas leakage at the high-pressure compressor (HPC) case split line eroded an SBV fuel tube, which caused fuel leakage and an engine core compartment fire.

    federalregister.gov
  5. The manufacturer redesigned the SBV fuel tube to prevent erosion from hot gas impingement.

    federalregister.gov
  6. The FAA estimates this proposed AD would affect 126 engines installed on aircraft of U.S. registry.

    federalregister.gov
  7. The FAA estimates the replacement action requires 36 work-hours at $85 per hour, plus $1,997 in parts cost, for a cost per product of $5,057 and a total cost on U.S. operators of $637,182.

    federalregister.gov
  8. The GE Passport 20 NPRM docket number is FAA-2026-13813.

    federalregister.gov
  9. The FAA must receive comments on the P&WC PW814GA/PW815GA NPRM by December 28, 2026.

    federalregister.gov
  10. The P&WC NPRM covers all Pratt & Whitney Canada Corp. Model PW814GA and PW815GA engines.

    federalregister.gov
  11. Transport Canada issued AD CF-2023-73, dated November 3, 2023, requiring replacement or inspection of affected components.

    federalregister.gov
  12. P&WC determined that certain engine components no longer meet the life-limited component cyclic limits and mandatory scheduled inspection/maintenance intervals previously published in the ALM.

    federalregister.gov
  13. Transport Canada superseded CF-2023-73 and issued Transport Canada AD CF-2025-71, dated December 30, 2025.

    federalregister.gov
  14. The proposed FAA AD would require updating the ALS of the existing ALM or ICA and the existing approved maintenance or inspection program to incorporate new or more restrictive instructions and associated thresholds and intervals for life-limited parts.

    federalregister.gov
  15. The P&WC NPRM docket number is FAA-2026-13811.

    federalregister.gov
  16. The P&WC unsafe condition, if not addressed, could result in damage to the engine and damage to the airplane.

    federalregister.gov
  17. The FAA must receive comments on the Boeing 747-400/747-400F NPRM by December 28, 2026.

    federalregister.gov
  18. The Boeing NPRM covers all Boeing Company Model 747-400 and 747-400F series airplanes.

    federalregister.gov
  19. The proposed AD was prompted by a report of an overheated ACMP that caused a fire in the main landing gear (MLG) wheel well.

    federalregister.gov
  20. A subsequent investigation found that a lock washer and nut was missing from a moving contact in the related electrical load control unit (ELCU), leaving the main contact operator bar unrestrained and allowing two-phase power to reach the ACMP.

    federalregister.gov
  21. The affected ACMPs can also be installed on Model 747-400 and 747-400F series airplanes.

    federalregister.gov
  22. The design of the ACMP has been modified to include fusible links as a new feature to prevent the ACMP from overheating if one of the electrical phases fails.

    federalregister.gov
  23. AD 2026-19-04 (Amendment 39-23471, 91 FR 61127, September 28, 2026) addresses the same unsafe condition for Model 777-200, -200LR, -300, -300ER, and -777F series airplanes.

    federalregister.gov
  24. The Boeing 747 NPRM docket number is FAA-2026-13810.

    federalregister.gov
  25. Written comments on the noise certification information collection renewal should be submitted by January 12, 2027.

    federalregister.gov
  26. The noise certification renewal carries OMB Control Number 2120-0659.

    federalregister.gov
  27. The original information collection was implemented to show compliance with the Aircraft Noise Abatement Act of 1968, a statute now codified in 49 U.S.C. 44715.

    federalregister.gov
  28. For this renewal, the FAA proposes 18 total noise certification projects per year.

    federalregister.gov
  29. The estimated average burden is 200 hours per applicant for the compliance report.

    federalregister.gov
  30. The estimated cost is $20,912 per applicant or a cumulative total of $376,416 per year for 18 applicants.

    federalregister.gov
  31. Noise compliance reports are required only once when an applicant wants to certificate an aircraft type.

    federalregister.gov
  32. Without this data collection, the FAA would be unable to make the required noise certification compliance finding.

    federalregister.gov
  33. The Laughlin AFB Class C airspace amendment is effective 0901 UTC, February 18, 2027.

    federalregister.gov
  34. The ARP geographic coordinates for Laughlin AFB are amended from lat. 29°21'36" N, long. 100°46'39" W to lat. 29°21'34" N, long. 100°46'41" W — a 2-second difference in latitude and longitude.

    federalregister.gov
  35. The first line in the text header is amended from 'ASW TX C Laughlin AFB, TX' to 'ASW TX C Del Rio, TX'.

    federalregister.gov
  36. The outdated term 'Airport/Facility Directory' is updated to 'Chart Supplement.'

    federalregister.gov
  37. The Laughlin AFB action does not change the lateral boundaries, altitudes, or operating requirements of the Class C airspace area.

    federalregister.gov
  38. The changes update FAA Order JO 7400.11M, dated July 30, 2026, and effective September 15, 2026.

    federalregister.gov